Electrically heated glass is usually used in places where the temperature difference between indoor and outdoor objects is large, such as power plants, waste treatment plants, outdoor vending machines and so on. The temperature difference between the inside and outside of the glass is easy to produce fog and water droplets. The effect of electrically heated glass is to prevent the formation of fog or condensation into water droplets on the glass. Electric heating glass is usually provided with hollow molecular sieve, the role is to make the glass as a whole to form a closed space, keep the dry hollow layer.

The hollow electrically heated glass is easy to form water in the middle of the electric heating glass when the temperature difference is large for a long time or the artificial unreasonable operation. If long-term water can not be timely and properly treated, it is easy to cause the conductive layer inside the glass coating to be corroded, and then cause the glass can not be heated, and the work is not smooth.

The water inside the electrically heated glass can be checked from the following aspects:

1. Check whether the electrically heated glass sealing groove is installed in the specified position.

2. Check whether the substrate inside and outside the glass is damaged. If the substrate is damaged, please replace the whole glass as soon as possible.

3. Check whether there is unadhesive around the glass.

4. In the early installation of electric heating products, the glass should be fully accepted and tested. If there are problems in the initial use, the manufacturer can be asked to replace the product.

After checking the above situation, if the problem still cannot be solved, you can consult the manufacturer to provide technical support. When we buy electrically heated glass, we should choose professional manufacturers, product quality can be guaranteed, and provide high-quality after-sales service, convenient to solve the problems in the process of use.