Appropriate safety precautions must be taken when installing glass curtain walls. First, consider the type of glass you use. Toughened glass is more impact-resistant than clear float glass. However, it can break when exposed to high loads. The best option is to use heat-reinforced glass, which is half as strong as toughened glass but is less likely to self-explode. You should also consider whether your glass is reflective or heat-absorbing.
Another safety precaution for the installation of glass curtain walls is the use of rear panels. The backboard is a sheet of metal attached to the curtain wall frame. Insulation should be installed between the backboard and the exterior cladding. This will prevent water from seeping in and causing damage.
In addition, when installing a glass curtain wall system, the hardware must be thoroughly checked. The fasteners must be fixed correctly. Otherwise, it can cause structural damage to the building and may even cause the curtain wall to collapse. Proper installation and inspection is essential to the safety of the building and its occupants.
Once the curtain wall members are in place, the glazing can begin. The process is simple and does not require much equipment. However, if you choose to use a ladder system, you should be prepared to use a temporary crane to assist. You need to install the frame first, then the glass.
It is important to follow the glass manufacturer's recommendations and safety guidelines. You should also look closely at how the glass is made. This ensures that there are no nickel sulfide impurities in the glass. If a piece of glass is suspected to be contaminated with nickel, take pictures of it and consult the manufacturer to make sure it is safe.
Glass Block: A Versatile and Stylish Solution for Architecture and Design
Top Solar Glass Supplier: A Key to Renewable Energy Solutions
Grey Glass Processing: Techniques, Benefits, and Applications
